Overview
The N-Fab C8850LR is a side mount roof bracket for a 50 in. light bar. It is a direct fit part, number C8850LR, in a textured or gloss black finish.
N-Fab makes heavy-duty tubular accessories for trucks and SUVs dating back to the 80s, including Nerf bars and pre-runners. This bracket is built from .084 wall steel in an all-welded, one-piece construction. It is zinc coated for corrosion protection before the powder coat is applied.
Key features
- Side mount roof bracket for a 50 in. light bar
- All-welded, one-piece steel with .084 wall thickness
- Zinc coated before powder coating
- The finish is either textured black or gloss black, so confirm which one you receive.
Roof bracket setup
Side mounted roof brackets carry a light bar at an offset, so the loads they see on rough ground can be sideways as well as downward. Solid welds and a zinc under coat help the bracket resist corrosion, but the fasteners and roof contact points still need regular checks.
Before drilling, confirm the roof area is clear of wiring, headliner and seams. Set the bracket and bar in position, and check the bar is level before tightening. Wind load on a roof bar can loosen fasteners over time, so inspect them after long highway runs. Touch up any chips in the finish quickly, since bare steel can rust at the edges of the bracket.
- Confirm roof clearance before drilling
- Check the bar is level before final tightening
- Touch up chips in the coating promptly
Specifications
| Brand | Nfab |
|---|---|
| Part number | C8850LR |
| UPC | 843206104420 |
| Mount type | Roof, side mount |
| Light bar size | 50 in. |
| Material | Steel, .084 wall thickness |
| Coating | Zinc coat with powder coating |
| Finish | Textured black (title) or gloss black (bullets) |
Vehicle fitment
Only a direct fit applies to this bracket. Verify your truck’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan any drilling and mounting hardware around the roof before starting. Run a 50 in. light bar through a fused relay, and check local rules before using roof-mounted lights on public roads.
What’s included
Compare the parts you receive against the installation steps before starting.
Not included: The 50 in. light bar, which the brackets are sized to hold.









