Overview
The Mile Marker Quadra-Trac part time conversion kit, part number 95-15204, converts the Quadra-Trac setup for part time use. It fits the 1974-1978 Jeep Wagoneer (SJ) in Base and Custom trims.
The kit adds new seals and lockout hubs without overdrive, and it is written for use with the original chain. Compare the parts against your own transfer case before installing.
Key features
- New seals included
- Lockout hubs without overdrive
- Designed for use with the original chain
- Part time conversion for the Quadra-Trac system
Part time driving tradeoffs
A part time setup disconnects the front axle drive from the transfer case so the system works like two-wheel drive on dry pavement. That keeps driveline wear down and fuel use reasonable, but the front axle is not engaged for slippery turns. Engage the lockout hubs only when the front axle is needed, and shift in and out of 4WD on firm ground when possible.
Converting a Quadra-Trac to part time is usually done alongside other driveline checks. Inspect the chain, sprockets and shaft seals before reassembly, since a worn chain can slip. Lubricate the front hub bearings and check for play after installing the lockout hubs.
After conversion, drive in 2WD and 4WD at low speed to confirm that the hubs and transfer case engage cleanly.
- Worn or stretched chain
- Hard or incomplete hub engagement
- Leaks at the new seals
- Noise from the front driveline
Specifications
| Brand | Mile Marker |
|---|---|
| Part number | 95-15204 |
| UPC | 758626152046 |
| Drive system | Quadra-Trac |
| Kit type | Part time conversion kit |
| Lockout hubs | Without overdrive |
| Chain | For use with original chain |
Vehicle fitment
It fits the 1974-1978 Jeep Wagoneer (SJ) in Base and Custom trims.
It fits the SJ Wagoneer only. Other Jeep models and years outside 1974-1978 are not covered, so compare your year, model and trim before buying.
Installation notes
The kit is written for the original chain and for lockout hubs without overdrive. Confirm both match your Wagoneer before starting work, since the kit is not shown in the diagram.
What’s included
The kit includes new seals and lockout hubs without overdrive.
Not included: the original chain, which the kit is written for.












