Overview
The Method Race Wheels push-through flush center cap, part number MRWCP-CWHB108, is a closed black cap for wheels with 5×5.5 or 6×5.5 bolt patterns. It is a push-through type and a Method Race Wheels tire and wheel accessory. It carries a universal fit designation.
This cap is designed for off-road racers using wheels built for their intended use. The wheel line behind it aims for designs that are lighter and stronger, developed with finite element analysis and field testing.
Key features
- Push-through type cap
- Closed design
- Black finish
- Lists 5×5.5 and 6×5.5 bolt patterns
- Carries a universal fit designation.
Choosing a center cap
A center cap covers the hub and keeps dirt and water out of the wheel center. Closed designs present a clean face and block debris more fully, while open designs allow access to the hub or lugs. Pick the style that matches how you service the vehicle.
Push-through caps are pressed into the wheel from one side and held in place by tabs or a friction fit. Check the fit before driving, because a loose cap can rattle or work out on rough ground. Replace worn tabs rather than forcing a poor fit.
Caps are a small part but affect appearance and protection. Clean the cap regularly with mild soap and water, and avoid abrasive pads on the finish. When swapping caps, confirm the bolt pattern and the wheel center before buying.
- Closed caps block more debris
- Check cap seating before driving
- Clean with mild soap and water
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWCP-CWHB108 |
| Cap type | Push thru |
| Open or closed | Closed |
| Bolt pattern | 5×5.5 and 6×5.5 |
| Color | Black |
| Fitment | Universal fit |
Vehicle fitment
This cap is a universal fit for 5×5.5 and 6×5.5 bolt patterns. Match the bolt pattern to your wheel rather than relying on the universal label alone.
Compare the wheel’s bolt pattern with the cap’s 5×5.5 and 6×5.5 pattern before installing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package quantity against the number of wheels you are fitting.










