Overview
The MBRP MBRS5342BLK is a Black Series 2.5 inch cat-back exhaust system for the 2010–2018 Toyota 4Runner. It has a single side exit and a black coated steel finish, with the tip included.
The black coat gives the exhaust a blacked-out look, and fully sealed seams help resist rust. The coating is formulated to handle the high heat and abrasive conditions an exhaust system sees.
Key features
- Single side exit
- 2.5 inch tubing
- Black coated steel construction
- Fully sealed seams to resist rust.
- Tip included with the kit
Caring for a black coated exhaust
A black coated steel exhaust depends on the coating to stay clean and even. Rinse road salt and grit off the pipes after winter driving, since trapped deposits can wear through the finish sooner. Use a mild soap and avoid abrasive pads that scratch the coat.
Sealed seams help slow rust, but the coat around the hangers and clamps takes the most abuse from rocks and water spray. Inspect those areas at routine service intervals and touch up small chips with high-temperature paint before corrosion spreads under the finish.
Signs that the old exhaust is worn include rust bubbles under the coating, a rattle from a loose heat shield and exhaust smell inside the cab. Address these early, since a leak at a joint can affect both the sound and how the engine runs.
- Rinse salt and grit after winter driving
- Touch up coating chips with heat-rated paint
- Check hangers for rust at service
Specifications
| Brand | MBRP |
|---|---|
| Part number | MBRS5342BLK |
| Product line | Black Series |
| System type | Cat-back |
| Material | Coated steel |
| Finish | Black coat |
| Exit location and type | Single side |
| Tubing size | 2.5 inch |
| Tip | Included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2010–2018 Toyota 4Runner in Limited, SR5, TRD Off-Road, TRD Pro and Trail trims.
4Runner model years outside 2010–2018 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes the cat-back system with tip. Inspect the packing list for hangers and clamps before installing.









