Overview
The MasterCraft Safety 3-inch x 3-inch dual harness belt, part number 110004, is a black 5-point driver restraint that bolts in. MasterCraft builds it for competitive and recreational use, and the belt meets or exceeds SFI 16-1 specifications.
The hardware is sheet alloy steel or drop forged alloy steel, and the webbing is military specification. The lap belt has a hook and loop latch guard cover and 2 or 3 pull down adjustments. It is sold individually and is not written for a specific vehicle.
Key features
- Meets or exceeds SFI 16-1 specifications
- Sheet alloy steel or drop forged alloy steel hardware
- Military specification webbing
- Lap belt with 2 or 3 pull down adjustments
- Hook and loop latch guard cover
- 3-inch lap belt and 3-inch dual harness shoulder belt
- Bolt-in style
Choosing a harness belt setup
A harness belt works with the seat, buckle and anchor points as one system. Before choosing a setup, confirm that the mounting points line up with the seat or roll cage structure and that the shoulder straps reach their anchors without twisting. Belts are often replaced together with their buckles and latch guards, so matching the components is usually simpler than mixing parts from different sources.
Inspect the webbing regularly for cuts, fraying, fading and stiffness. Check that the buckle latches with a firm engagement and releases cleanly, and that the pull down adjusters hold their position under load. Clean the webbing with mild soap and water and let it dry fully before use. Any harness that has taken a heavy impact should be replaced, even if it looks intact.
- Check webbing for cuts and fraying
- Test the buckle latch and release
- Confirm anchor points before mounting
- Keep the latch guard cover in place
Specifications
| Brand | MasterCraft Safety |
|---|---|
| Part number | 110004 |
| UPC | 700003730095 |
| Belt type | 5-point dual harness |
| Lap belt size | 3 wide by 55 long |
| Lap width | 3 inch |
| Mount | Bolt-in |
| Color | Black |
| Hardware | Sheet alloy steel or drop forged alloy steel |
| Webbing | Military specification |
| Standard | Meets or exceeds SFI 16-1 |
| Sale quantity | Sold individually |
Vehicle fitment
No vehicle fitment is included. It is a universal fit belt rather than a factory replacement, so it is not matched to a specific year, make or model. Make sure your vehicle’s year, model and trim are confirmed before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the date on the SFI tag and plan for re-webbing or replacement two years after that date, as most sanctioning bodies require.
What’s included
One dual harness belt with a 3-inch lap belt and hook and loop latch guard cover, sold individually. Mounting hardware is not part of the package, so check the package contents against your installation before starting.
















