Overview
The MagnaFlow M/F35215 is a polished stainless steel exhaust tip with a 6 Inches diameter, made by MagnaFlow Exhaust. It sits at the outlet end of a tailpipe and is built from round 304 stainless steel, which the brand describes as its top grade of stainless.
Stainless steel is 100% 304 grade, and its polish holds its luster longer than chrome plating. Single wall or double wall construction is available, with clamp-on or weld-on installation. Each tip is covered by a Lifetime Warranty. It is universal fit, so no particular vehicle applies.
Key features
- Round body in 100% 304 stainless steel
- Polished luster the brand says outlasts chrome plating
- 6 Inches diameter
- Single wall or double wall versions
- Clamp-on or weld-on installation options
- Lifetime Warranty from MagnaFlow
Large diameter fit checks
A 6 Inches tip is a large outlet, so the first check is the pipe it will finish. Measure the exhaust outside diameter at the outlet and confirm the tip opening matches it, since a tip that is too small can rattle while a tip that is too large can leave a visible gap. Check that the tip will not rub against the bumper or valance after mounting.
Larger tips add weight at the end of the pipe, so a clamp-on design benefits from a secure mounting point and periodic checks. Inspect the clamp and the joint after the first few drives, then tighten it if the tip has moved. Weld-on tips need the pipe to be clean and the weld area free of coating before heating.
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | M/F35215 |
| Finish | Polished |
| Material | 100% 304 stainless steel |
| Shape | Round |
| Diameter | 6 Inches |
| Wall construction | Single or double wall |
| Installation | Clamp-on or weld-on |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit means this 6 Inches tip is not tied to a particular year, make or model. Check that the 6 Inches diameter matches the exhaust pipe you are finishing, and pick the wall type and installation method that suit your project.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Clamp-on tips are fastened with clamps instead of welds, whereas weld-on tips are permanently joined to the pipe. Stainless steel welding takes specific equipment and skill, so a qualified exhaust shop is a sensible choice for weld-on work. Let the tip cool before touching it after the engine has run.
What’s included
The exhaust pipe, muffler and welding supplies needed to mount the tip are not included. Check the package contents against your installation before starting.
Not included: the exhaust pipe, muffler or welding supplies needed to mount the tip.









