Overview
The Borla universal exhaust tip, part number 20162, is a round stainless steel tip with a black chrome finish and a 2.75-inch diameter. It is meant as a visible finish at the back of the exhaust system, where the pipe exits.
The tip is Universal Fit, so no vehicle or engine is matched to it. Check the 2.75-inch diameter against your exhaust pipe before ordering.
Key features
- Round tip shape
- Black chrome finish
- Stainless steel construction
- 2.75-inch diameter
Choosing a tip for your exhaust
An exhaust tip is a cosmetic end cap on the tailpipe, so its main job is to look finished while the muffler and pipe handle quieting and routing. Before buying one, look at the pipe end itself. Some tips slide over the outside of the pipe, while others sit flush or fit inside. A tip that is too small will not cover the pipe end neatly, and a tip that is too large can look out of place. Measure the outside diameter of the pipe where the tip will sit, then compare that figure with the tip’s diameter.
Stainless steel and black chrome both resist road grime, but the surface still benefits from simple care. Wipe the tip with mild soap and water and dry it so water spots and road salt do not sit on the finish. Check the joint between tip and pipe after the first few drives, since heat cycling can loosen a clamp or shift a tip over time. If the finish flakes, pits, or the tip rattles, the mounting has likely worn and should be addressed before the surface gets worse.
- Measure the pipe outside diameter before buying
- Check how the tip mounts to the pipe end
- Inspect the joint after the first few drives
Specifications
| Brand | Borla |
|---|---|
| Part number | 20162 |
| Material | Stainless steel |
| Shape | Round |
| Finish | Black chrome |
| Diameter | 2.75 in |
| Fitment | Universal Fit |
Vehicle fitment
This tip is marked Universal Fit and names no vehicle, year or engine. Fitment depends on the 2.75-inch diameter matching your pipe.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the outside diameter of the exhaust pipe where the tip will sit, because a 2.75-inch tip on a smaller or larger pipe may not seat correctly.
What’s included
No mounting clamps or fasteners are described with this tip.









