Overview
The Lund 300020 is a running board mounting kit for the 1998-2011 Ford Ranger. It fits the Edge, FX4, STX, Splash, Sport, Tremor, XL and XLT trims, and it is a direct fit.
The kit has heavy duty solid U channel steel construction and installer and factory preferred body mount designs. The mounting is custom fit, and no drilling is required on some applications. Confirm hardware count, bracket dimensions and compatible running boards before ordering.
Key features
- EZ Bracket mount kit for running boards
- Heavy duty solid U channel steel construction
- Installer and factory preferred body mount designs
- Custom fit mounting
- No drilling required on some applications
- Direct fit for the Ford Ranger
Running board mounts and wear
A running board mount carries the weight of a board and anyone stepping on it, and it also sees road spray and flexing from rough terrain. Mount hardware and brackets can loosen gradually, so periodic checks matter more than a single torque check at installation. Keep the board edges and bracket clearances in view while driving on uneven ground.
Inspect the brackets for cracks at weld points and bends, look for rust where the steel meets the body, and confirm the boards still sit level. If a board sags or rattles, check the mount hardware before adding any spacers or shims. Keep the clearance to the tires and rocker panel in view during each check, and note any change so it can be corrected early.
- Inspect bracket welds for hairline cracks
- Look for rust at the body mount points
- Check running board height on both sides
- Re-tighten hardware after rough-road driving
Specifications
| Brand | Lund |
|---|---|
| Part number | 300020 |
| Product type | Running board mounting kit (EZ Bracket) |
| Construction | Heavy duty solid U channel steel |
| Mount design | Body mount |
| Drilling | Not required on some applications |
| Fit type | Direct fit |
| Vehicle | 1998-2011 Ford Ranger |
Vehicle fitment
It fits the 1998-2011 Ford Ranger in Edge, FX4, STX, Splash, Sport, Tremor, XL and XLT trims.
It fits Ranger models from 1998 to 2011 only, and it is not a fit for other Ford models or later Ranger generations. The kit is a mounting kit, so the running boards are separate. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount kits hold running boards, so support the vehicle safely and get a second person to hold the brackets while you start the bolts.
- Tighten the hardware as the Lund instructions specify.
- Clearances to the body, tires, exhaust and wiring need checking before the last turn of the wrench.
- Check the bolts again after the first drive, and after any rough road.
- Where drilling is needed, consider a professional if you are not comfortable with it.
What’s included
Not included: the running boards themselves; this is only the mount kit.










