Overview
The Kleinn Train Horns 2151 is a heavy duty tank-mount air pressure switch. It regulates the air pressure held in your air tank and is wired to the air compressor, switching the compressor on and off automatically as tank pressure changes.
It is universal fit, so it is a pneumatic control component rather than a part made for one vehicle.
Key features
- Heavy duty construction for tank-mount use
- Regulates air pressure in the air tank
- Wired to the compressor for automatic on and off control
- Part number 2151 from Kleinn Train Horns
Matching the switch to the system
A pressure switch is only one part of an air system, and its job depends on the tank, compressor and lines around it. Mismatched components can cause short cycling, where the compressor starts and stops too often, or let pressure drop more than the horns or tools need. Before wiring, confirm the switch’s rated function matches the compressor’s electrical load and the tank’s working pressure range.
Care is mostly about keeping water and debris out. Drain the tank regularly, check the air line fittings for leaks, and watch for a compressor that runs longer than usual, which can signal a leak or a failing switch contact. Disconnect power before inspecting any connection, and recheck the wiring after the first few uses to make sure terminals have not loosened from vibration.
- Inspect terminals for corrosion and looseness
- Listen for a compressor that cycles more often than usual
- Check air lines and fittings for leaks with soapy water
- Drain tank moisture on a regular schedule
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | 2151 |
| UPC | 819147010922 |
| Type | Heavy duty pressure switch |
| Mounting | Tank-mount |
| Function | Air pressure regulation with compressor control |
Vehicle fitment
It is universal fit, so match it to your air tank and compressor setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The switch is wired to the compressor, so connect it to the compressor circuit using the wiring method the compressor requires, and disconnect power before working on the connections.
What’s included
The pressure switch. Check the package contents against your installation before starting.









