Overview
It is a passenger side rocker panel backing plate for the 1984–2001 Jeep Cherokee (XJ). A backing plate supports the rocker area, the lower body section beside the doors, during body repair.
It is made from high gauge steel with an OEM Electro-Deposit primer (EDP) finish, and it is designed to match original factory fit.
Key features
- Passenger side position
- High gauge steel construction
- OEM Electro-Deposit primer (EDP) finish
- Fits several Cherokee XJ trims
Rocker area repair notes
The rocker area takes splash, stone strikes and road salt, so it is one of the first places rust forms on an older Cherokee. A backing plate supports the body during repair work and gives the new metal a solid base to weld to. Remove loose rust and check the surrounding floor and pinch weld before the plate is set in place.
Plates are usually fitted with weld-through primer on the mating faces and sealed afterward to keep water out. Drain holes should stay open so moisture does not collect inside the rocker. Paint the plate with a compatible primer before final assembly.
- Clean mating surfaces to bare metal
- Use weld-through primer on contact faces
- Keep drain paths clear after the repair
- Seal seams to slow future corrosion
Specifications
| Brand | Key Parts |
|---|---|
| Part number | 0482-302R |
| UPC | 70000700327 |
| Position | Passenger side |
| Material | High gauge steel |
| Finish | OEM Electro-Deposit primer (EDP) |
| Fit type | Direct fit |
| Type | Rocker panel backing plate |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
It covers Cherokee XJ models only. Grand Cherokee, Liberty and Wrangler models are not covered. Check the year, model and trim against your vehicle before fitting.
What’s included
One passenger side rocker panel backing plate, part number 0482-302R.









