Overview
The Kentrol BackSide license plate mount with LED, part number 80707, relocates the plate and carries an LED 3rd brake light for the JK generation Jeep Wrangler, including the Rubicon and Unlimited. The black textured finish resembles the OE door handles and side mirrors. All Kentrol products come with a limited lifetime warranty.
Key features
- Relocates the license plate
- Includes LED 3rd brake light
- Stainless steel hardware for installation included
- Black powder coat over 304 stainless steel
- Each set inspected for fit, finish and function
Wiring the brake light
A relocated plate mount changes where the rear lights sit, so plan the wiring before you mount anything. Run the LED lead along the existing harness and keep it clear of the tailgate hinge and any moving parts. A fused relay protects the vehicle’s wiring and makes the brake light easier to service later.
Grounds deserve attention too. A clean, bare metal ground point prevents flicker and dim output, which are common complaints after aftermarket lighting is added. Test the brake and plate light with the ignition on and the tailgate open or closed, so you can confirm both work before reinstalling the trim.
Stainless steel hardware is only as good as the surface it grips. Wipe the mount area clean and tighten the hardware evenly. Recheck the bolts after the first few drives, since bracket hardware can settle as the vehicle is used.
Specifications
| Brand | Kentrol |
|---|---|
| Part number | 80707 |
| UPC | 700008407851 |
| Material | 304 stainless steel |
| Finish | Black powder coat |
| Light | LED 3rd brake light |
| Hardware | Stainless steel hardware included |
Vehicle fitment
It is made for the JK Wrangler, including Rubicon and Unlimited models, which covers the 2007-2018 Jeep Wrangler (JK).
Wrangler generations outside the JK years, such as the TJ, LJ and JL, are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stainless steel hardware is also included for installation. Wiring the LED 3rd brake light should go through a fused relay, and lighting must meet local road-use rules.
What’s included
The BackSide license plate mount with LED 3rd brake light and stainless steel hardware.


























