Overview
The KC HiLites LZR LED 4 Inch Driving Light Kit, part number 300, is a round 4-inch spot beam driving light built around CREE LEDs and KC’s finned turbine housing. KC gives this kit a universal fit, with no year, make or model named, and it mounts on a bracket.
The housing design is central to the light. The aluminum finned turbine shape manages heat, which lets the LEDs run at higher output. The reflector is engineered to favor distance without an overly concentrated hotspot.
Key features
- Round 4-inch LZR LED light
- CREE LEDs that are bright and highly efficient
- Aluminum finned turbine housing for thermal management
- KC engineered optical reflectors that favor distance
- Wiring harness, switch and stone guards included
Heat and light output
LED lights produce heat at the emitter, and that heat has to leave the housing to keep output steady. A finned housing spreads heat across more surface area, which helps the light hold its output over long use. Keep the fins clear of mud and debris, since packed dirt can trap heat and reduce the light’s efficiency.
Driving lights see rough use, so check the mounting bracket and the lens seal after trail runs. Stone guards protect the lens from gravel, and a cracked guard should be replaced rather than left in place. A spot beam is best for distance, so aim the light down the path ahead rather than into the air.
- Clean the fins after mud or dust
- Check the lens seal after washing
- Replace cracked stone guards
- Aim down the path ahead
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 300 |
| UPC | 84709003005 |
| Lens color | Clear |
| Bulb type | LED (CREE) |
| Beam | Spot |
| Light shape | Round |
| Type | Driving light |
| Housing | Aluminum finned turbine |
| Included | Wiring harness, switch, stone guards |
| Mounting type | Bracket |
| Fitment type | Universal Fit |
| Sold as | Kit |
| Size | 0 to 10 inches |
Vehicle fitment
KC gives this kit a universal fit, with no year, make or model. Confirm the mounting location and clearance on your own vehicle before installing the bracket.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the harness through the included switch and a fused circuit. Verify the harness routing on your vehicle before connecting power. Check local rules for auxiliary driving lights before use on public roads.
What’s included
A driving light kit with a wiring harness, switch and stone guards.
Not included: Mounting hardware: confirm what you need for the bracket before starting the installation.















