Overview
The KC HiLites 72085 is an acrylic shield cover for the FLEX Dual LED Light. It is secured by 4 screws that go into the threaded holes on the front of the light, giving the lens a protective front cover.
Fitment is universal, so the shield is matched to the FLEX Dual LED Light rather than to a vehicle year, make or model.
Key features
- Acrylic construction
- Four-screw mount into the light’s front threaded holes
- Made for the FLEX Dual LED Light
Before you install
A front shield protects a light lens from stones, brush and trail debris. Acrylic is a common material for this job because it resists impact well and is light in weight. Before fitting any shield, clean the lens and the front face of the light so the cover seats evenly and grit does not get trapped between the two surfaces.
Because the shield attaches through the light’s front threads, inspect those threads for damage first. Stripped or cross-threaded holes can leave the cover sitting crooked. Tighten the screws in a cross pattern so the shield lies flat against the light, then recheck them after the first few rough drives.
- Inspect the acrylic for cracks or cloudiness after rough trail use
- Recheck screw tightness after the first few drives
- Clean with a soft cloth and mild soap rather than abrasive pads
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 72085 |
| UPC | 84709720858 |
| Material | Acrylic |
| Mounting | 4 screws into threaded holes on the front of the light |
| For | FLEX Dual LED Light |
Vehicle fitment
Universal fit. The shield is for the FLEX Dual LED Light and is not sized for a particular vehicle.
Installation notes
Secure the shield with the 4 screws into the threaded holes on the front of the light. Check that your hardware matches the light’s threads before you start tightening.
What’s included
The acrylic shield cover.
Not included: the FLEX Dual LED Light.









