Overview
The KC HiLites 72083 is an acrylic shield cover for the FLEX Dual LED Light. It bolts on with 4 screws that thread into the holes on the front of the light, adding protection for the lens.
The shield is matched to the FLEX Dual LED Light, and fitment is universal rather than vehicle-specific. It suits owners who run this light and want a clear front cover.
Key features
- Acrylic shield cover
- Bolts on with 4 screws
- Installs to threaded holes on the front of the FLEX Dual LED Light
- Designed for the FLEX Dual LED Light
Before you install a shield
A front shield protects the lens of a light that sits exposed to stones, brush and weather. Because it bolts on, the most important check is that the threaded holes on the light are clean and undamaged before the shield goes on.
Acrylic is light and clear, but it can scratch and cloud if it is cleaned with abrasive materials. Wipe the shield with a soft cloth and mild soap, and keep grit off the surface when cleaning the light. Check the screws after rough use, since vibration can back them out gradually.
If a screw strips or a hole is damaged, stop and address it before driving, rather than forcing the shield into place.
- Clean the threaded holes before fitting
- Check screw tightness after rough trips
- Replace a shield with cracks or heavy clouding
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 72083 |
| UPC | 84709720834 |
| Material | Acrylic |
| Mounting | 4 screws into threaded holes on the front of the light |
| For | FLEX Dual LED Light |
Vehicle fitment
This shield is universal fit. It is sized to the FLEX Dual LED Light rather than to a vehicle.
Installation notes
Confirm the shield’s part number against your FLEX Dual LED Light before ordering. Install it with the 4 screws into the threaded holes on the front of the light.
What’s included
The acrylic shield cover, mounted with 4 screws.
Not included: the FLEX Dual LED Light.









