Overview
The JcrOffroad winch mount block off kit in bare steel, part number JKVCMBO-BARE, covers the winch mounting area on the front bumper of a 2007 to 2017 Jeep Wrangler JK. It suits owners who do not plan to run a winch, or who want the opening covered until they can add one.
The kit fits the JK Wrangler Vanguard, Crusader, Mauler and Deluxe Mauler front bumpers. Bumpers come in OE and non-OE versions, so confirm which one you have before drilling.
Key features
- Bare steel finish
- Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited models
- Fits 2-door and 4-door models
- Covers the winch mounting area on the bumper
- Works with Vanguard, Crusader, Mauler and Deluxe Mauler front bumpers
- Installation requires drilling two holes in the bumper
Before you drill a bumper
A block-off kit closes the winch opening on a front bumper, which keeps dirt and water out and gives the bumper a finished look when no winch is in use. The trade-off is that the bumper must be drilled, so the work needs to be planned around the existing bumper shape and any hardware already mounted nearby.
Before drilling, remove anything in the work area and check that the drill bit will not reach the fuel lines, wiring or brackets behind the bumper. Mark the holes from the kit’s own fit, then recheck alignment before the first hole. Clean bare steel with a rust-inhibiting primer after drilling to slow corrosion at the cut edges.
- Confirm bumper type before marking
- Clear the area behind the bumper before drilling
- Prime exposed cut edges promptly
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JKVCMBO-BARE |
| UPC | 70000777731 |
| Finish | Bare steel |
| Vehicle type | Jeep Wrangler JK, 2-door and 4-door |
| Installation | Drilling two holes in the bumper |
Vehicle fitment
It fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited models with 2-door and 4-door bodies. It is made for the JK front bumpers named above.
It is made for JK Wrangler models. Match the year, model and trim to your vehicle before buying.
Installation notes
The kit requires drilling two holes in the bumper, so mark and check the hole locations before drilling. Wear eye protection when drilling.
What’s included
Check the package contents against your installation before starting.












