Overview
The Hella ValueFit Northern Lights Rocker LED Kit, part number 357212011, is an ambient LED lighting kit with a flush mount and phone app control. The lights use 3 RGB LEDs and are listed at 6000K, with a low profile die-cast aluminum housing.
Bluetooth links the kit to iOS and Android phones. The app can set any color, run flash patterns, change colors in step with music and switch the kit on and off on a timer. The kit runs on multivolt 10-30V DC.
Key features
- Color, flash pattern and music-sync control from the app
- Bluetooth connection for iOS and Android
- Flush mount with a low profile
- Die-cast aluminum housing
- On and off timer in the app
Planning a flush mount kit
A flush mount ambient kit sits close to its surface, so the spot you pick should be flat, clean and free of heat sources. Measure the recess and check that the low profile housing fits without straining the surface or blocking doors, panels or moving parts. Plan the wire route before fixing anything, since the cable has to reach the power source without rubbing on sharp metal.
Bluetooth control depends on the phone and the app staying paired, so keep the phone within normal range of the kit during setup. Color accents and music sync are easiest to judge after dark, so test each setting in the spot where the lights will be used. Inspect the lens and seals every season for water intrusion or cracks, and keep the die-cast housing free of grit that could scratch the finish.
Specifications
| Brand | Hella |
|---|---|
| Part number | 357212011 |
| UPC | 760687173250 |
| Product type | Rocker LED ambient light kit |
| Mount | Flush |
| Profile | Low |
| LEDs | 3 RGB LEDs |
| Color temperature | 6000K |
| Lens color | Clear |
| Finish | Black |
| Housing | Die-cast aluminum |
| Voltage | 10-30V DC, multivolt |
| Connectivity | Bluetooth, iOS and Android app |
Vehicle fitment
No vehicle is named for this kit. It is an accessory lighting kit, so mounting spots and wiring depend on the vehicle it is installed on.
Confirm your vehicle’s year, model and trim before ordering. Choose a flush mount location with room for the low profile housing.
Installation notes
The kit comes with mounting instructions, which cover the flush mount. Use a fused circuit for the 10-30V DC supply and route the wiring away from heat and moving parts. Check local rules on accent lighting before driving on public roads.
What’s included
The kit includes four RGB LED lights, one 4x converter and mounting instructions.


















