Overview
The Hella ValueFit LED work lamp 357106002 is a 4 inch square light rated at 25 watts and 2000 lumens, with an aluminum housing. It is universal fit, so it suits general work lighting rather than one vehicle model.
Hella developed the ValueFit range for jobs where several low wattage lamps can stand in for one high power work light, and this square model follows that approach. Hella also describes close range and long range beam options within the line.
Key features
- 4 inch square housing
- 25 watt LED output
- 2000 lumens of light output
- Aluminum housing
- Universal fit from Hella.
- Low wattage design that Hella pairs with high lumen output
Fuse and wiring for higher draw
Any lamp drawing 25 watts needs a fuse rated for the current it draws and a feed that is sized for that load. Undersized wire can overheat along its length, and a fuse that is too large will not protect the wire if a fault occurs. Use a relay close to the battery where the wiring run is long, so the switch carries only the control current.
Where several lamps are run together, add up their draw before choosing the fuse and wire. Check the connections periodically for heat marks or loosening, especially where the lamp is mounted outdoors.
- Add up the draw of all lamps on one circuit
- Use a relay for long wire runs
- Inspect connections for heat marks
Specifications
| Brand | Hella |
|---|---|
| Part number | 357106002 |
| UPC | 760687161646 |
| Shape | Square |
| Size | 4 inch |
| Power | 25 watts |
| Brightness | 2000 lumens |
| Housing | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle make, model or model year applies, so the user chooses the mounting location and bracket.
Measure the mounting area before you fit the lamp.
Installation notes
Size the fuse and wire for the 25 watt draw, and check local road-use rules before mounting the lamp on a street vehicle.
What’s included
Confirm which mounting parts and wiring you need before installing the lamp.








