Overview
The Garvin Industries Overhead Expedition Rack, part number 44072, is a black steel overhead rack for 2-door Jeep Wrangler JK models. It is built from 3/4 inch square tubing with support brackets made from 1 inch heavy duty square tubing, and it accepts all Wilderness rack accessories.
The rack tilts back for lowering a soft top or removing a hard top, and the Freedom Top front sections can be removed without taking the rack off.
Key features
- Weight capacity of 300 pounds
- Accepts all Wilderness rack accessories
- Rack tilts back for soft-top lowering or hard-top removal
- Freedom Top front sections removable without removing the rack
- Black powder coat finish
- Steel construction with 3/4 inch square tubing
Soft top and hard top use
Overhead racks on a Wrangler carry most of their load high and away from the center of the vehicle, so weight placement matters more than on a standard roof. Place heavier items low on the basket and close to the centerline, and keep the total within the rated limit before setting off.
A rack that tilts back gives access to a soft top or lets a hard top come off, but the rack should be returned to its upright position and locked before driving. Check the pivot and locking points each time the rack is raised or lowered, and keep the tilt hardware free of grit.
Drilled mounts need care. Mark the positions carefully, use a centering tool, and deburr holes before fastening. Once mounted, recheck fasteners after the first few trips, and watch for movement at the bracket joints, which can signal that a bolt has backed out.
- Load heavy gear low and centered
- Lock the tilt mechanism before driving
- Recheck bolts after the first trips
- Clean pivot points after dusty or wet trails
Specifications
| Brand | Garvin Industries |
|---|---|
| Part number | 44072 |
| UPC | 70000425200 |
| Roof rack type | Cargo basket with mounting kit |
| Material | Steel |
| Tubing | 3/4 inch square; support brackets 1 inch heavy duty square tubing |
| Weight capacity | 300 pounds |
| Finish | Black powder coat |
| Door configuration | 2-door models only |
| Drilling | Required, minor, above and below the tail lights |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK) in the 70th Anniversary, Rubicon, Sahara, Sport and X trims.
Four-door Wrangler JK models, the Wrangler JL, and earlier Wrangler generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minor drilling is required above and below the tail lights, so check the mounting positions before drilling. Keep loads within the 300 pound limit.
What’s included
The kit is a cargo basket with mounting kit, so count the individual pieces before starting.


















