Select your vehicle

Garvin Industries Expedition Rack Ladder – 29611

Garvin Industries

Shop Jeep Wrangler JK Roof Racks on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Garvin Industries Expedition Rack Ladder, part number 29611, for the passenger side rear only
  • Bolts on to the Expedition rack with no drilling required
  • Made from 3/4 inch square steel tubing to match the rack
  • Black texture powder coat finish
  • Fits 2011–2017 Jeep Wrangler JK models

Description

Overview

The Garvin Industries Expedition Rack Ladder, part number 29611, is a passenger side rear ladder that gives access to the Expedition rack on Jeep Wrangler JK models. It bolts to the Expedition rack without drilling and is made from 3/4 inch square steel tubing to match the rack.

The ladder works only at the passenger side rear of the rack. It suits 2-door and 4-door Wrangler JK models and fits 2011–2017 Jeep Wrangler (JK) models in several trims.

Key features

  • Passenger side rear position only
  • Bolts on to the Expedition rack with no drilling required
  • Made from 3/4 inch square steel tubing
  • Black texture powder coat finish
  • Suits 2-door and 4-door models
  • Made in the U.S.A.

Expedition rack ladder use

A rack ladder gives a safer way up to a roof load than climbing the tire or bumper, but it works best when the ladder is kept at the position it was designed for. A single side-rear ladder is a practical choice when access is needed at one corner, and it leaves the other side clear for gear and doors.

Steel ladders are durable, yet powder coat can chip where boots or gear scrape the rungs. Touch up chips early with a suitable coating to limit rust at the bare metal. Wipe off mud and salt after trail use, and check the bolted joints for tightness after the first few drives.

When loading the roof, keep weight centered and secure gear with straps so nothing shifts toward the ladder. Use the ladder for stepping onto the rack, not as a seat or a load platform, and keep hands and feet clear of the edges.

  • Climb at the passenger side rear only
  • Touch up chips in the powder coat early
  • Recheck bolts after rough trail runs
  • Keep rack loads centered and strapped

Specifications

Brand Garvin Industries
Part number 29611
UPC 70000694956
Position Passenger side rear
Tubing 3/4 inch square steel
Finish Black texture powder coat
Door configuration 2-door and 4-door models
Drilling Not required
Origin Made in the U.S.A.

Vehicle fitment

It fits these Jeep Wrangler (JK) models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, and their Unlimited versions:

The 2007–2010 Wrangler JK, Wrangler JL, and Wrangler TJ, LJ and YJ models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The ladder bolts on to the Expedition rack with no drilling. Because it fits only the passenger side rear, mount it at that corner only.

What’s included

The ladder is the item included; the bolts should be counted against the installation before starting.

SKU: GRV29611 Category:

Specification

Shipping weight 18.00 lbs
Package dimensions 44.00 × 18.50 × 7.50 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2011–201770th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 29611 ladder fit the driver's side?

No. It works only at the passenger side rear of the Expedition rack, so it cannot be mounted on the driver's side. Confirm the mounting side before installing the ladder.

Which Wrangler years are covered by the 29611?

It fits 2011–2017 Jeep Wrangler JK models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims and their Unlimited versions. Confirm your year and trim before ordering.

Does the Expedition Rack Ladder need drilling?

No. The ladder bolts on to the Expedition rack with no drilling, and it is made to match the rack's 3/4 inch square steel tubing. Mount it at the passenger side rear only.

What is the finish, and where is it made?

It has a black texture powder coat finish and is made in the U.S.A. It suits both 2-door and 4-door Wrangler JK models, so body style does not limit fit within the 2011–2017 model years.

Can the ladder be moved to the driver's side later?

No. It is designed for the passenger side rear of the Expedition rack, so it should stay in that position. If you need access on the other side, look for a ladder built for that corner rather than modifying this one.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Roof Racks on Amazon