Overview
The Garvin Industries G2 Series Trail Rack, part number 66703, is a tailgate-mounted steel trail rack for the 2007-2018 Jeep Wrangler (JK), 2-door and 4-door models.
The rack is made from 3/4 inch square steel tubing and finished in black powder coat. It mounts to the factory holes in the tailgate with no drilling required, and it gives extra room for gear. It works only with G2 Series Bumpers.
Key features
- Tailgate-mounted trail rack for the Wrangler JK
- Made from 3/4 inch square steel tubing
- Powder coated with a zinc primer and textured top coat
- Mounts directly to the tailgate at factory holes; no drilling required
- 32-1/2 inches wide, 17-1/2 inches deep and 5 inches high
- Designed to hold 75 lb of gear
- Only works with G2 Series Bumpers
Tailgate rack upkeep
A tailgate-mounted rack puts weight on the rear of the vehicle, which changes how it handles on rough roads. Keep loads low and centered, and secure gear with straps so nothing shifts on uneven ground. A tailgate rack can also affect access to the rear, so plan how you will open the tailgate with gear in place.
Inspect the mounting points periodically, especially after off-road trips. Look for loose fasteners, cracked welds or paint chips that can let rust start on steel. Touch up scratches in the powder coat with matching paint to slow corrosion. If the tailgate shows wear around the mounting holes, address it before adding more weight.
Gear placement matters as much as weight. Put heavier items low and near the center of the rack, and keep the total load within the stated limit. Soft bags with compression straps are easier to manage than loose items that can slide or catch wind at highway speed.
Specifications
| Brand | Garvin Industries |
|---|---|
| Part number | GRV66703 (66703) |
| UPC | 554004004 |
| Product type | G2 Series Wilderness Trail Rack |
| Material | Steel, 3/4 inch square tubing |
| Finish | Black powder coat with zinc primer and textured top coat |
| Width | 32-1/2 inches |
| Depth | 17-1/2 inches |
| Height | 5 inches |
| Load capacity | 75 lb |
| Mounting | Factory tailgate holes, no drilling |
| Requirement | G2 Series Bumpers |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 66703 covers: 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X).
Fitment covers 2007-2018 Jeep Wrangler (JK) models. It is not made for the Wrangler TJ or JL. Confirm your model year, and confirm you have a G2 Series bumper, before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install roof and carrier accessories with all clamps and fasteners tightened to the specified torque. Re-check them after the first miles and before each trip, and stay within the load limits of the rack and the vehicle roof.
What’s included
One trail rack, mounting to the tailgate through factory holes.
Not included: A G2 Series bumper is required and is not included.









