Overview
The Crown Automotive 52003183 is a driver side rear emergency brake cable for the 1987–1989 Jeep Wrangler (YJ). The emergency brake cable, also called the parking brake cable, pulls the rear brake shoes when the handbrake is applied.
The cable measures 33-1/2 inches in length and comes with retaining clips already installed on the cable.
Key features
- Rear left emergency brake cable
- Length of 33-1/2 inches
- Retaining clips come preinstalled
- Direct fit for 1987–1989 Wrangler (YJ) models
Checking the cable before fitting
Before fitting a driver side rear emergency brake cable, compare it with the old cable side by side. Check the overall length, the end fittings and the way the housing is held, since small differences can change how the lever feels. A cable that arrives with its clips already installed is simpler to fit, but the clips still need to sit correctly in their mounts.
Routing matters for a long life. The cable should run clear of the exhaust, the fuel lines and the suspension, and it should follow the same path as the original. Once it is in place, operate the lever several times and check that the rear brake releases fully. Lubricate the pivot points lightly and recheck the adjustment after the first few miles of driving.
- Compare the old and new cable side by side
- Keep the cable clear of heat sources and moving parts
- Check that the clips sit fully in their mounts
- Recheck the adjustment after the first miles
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52003183 |
| UPC | 848399013092 |
| Part type | Emergency brake cable |
| Position | Rear left, driver side |
| Cable length | 33-1/2 inches |
| Retaining clips | Preinstalled |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1987–1989 Jeep Wrangler (YJ).
This is the left side cable only. Check your year, model and trim against this fit before buying, especially for YJ years from 1990 on.
Installation notes
The cable is supplied with its retaining clips already installed.












