Overview
The Firestone Ride-Rite Leveling Compressor Wiring Harness, part number 9307, is a professionally made harness for installing an air leveling system compressor. Firestone gives it a universal fit label.
It is made for professional-style installation. Wire lengths, connector types and suitable compressor models are not known, so confirm them before wiring.
Key features
- Professionally made wiring harness
- Intended for air leveling system compressor installation
- Universal fit label from Firestone Ride-Rite
- Part number 9307
Preparing an air leveling wiring install
Installing a leveling compressor is mostly a wiring job. The compressor needs a clean power feed, a proper ground and a protected circuit, and the harness is the piece that ties those together. Before cutting or crimping, lay out the components, measure the run from the battery area to the compressor location, and decide where the controls will mount.
Good preparation saves time later. Use wire and connectors rated for the current the compressor draws, keep runs short where possible, and avoid sharp bends at the grommets. Mark each wire at both ends so the connections are easy to trace. Confirm the ground is bare metal and tight before testing.
Test the system in stages. Check power and ground with a meter first, then run the compressor briefly to confirm it responds to the controls. Look for heat at connectors and listen for unusual sounds during the test, and correct any problem before the system is left running unattended.
- Measure the run before cutting wire
- Mark both ends of each wire
- Confirm a solid bare-metal ground
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 9307 |
| UPC | 767555117316 |
| Fitment | Universal fit (per Firestone Ride-Rite) |
Vehicle fitment
No vehicle year, make, model or trim applies to this harness. Use the compressor system it connects to as the reference for compatibility.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the harness with the instructions supplied for your Ride-Rite compressor, and confirm each connection against that compressor before powering up.
What’s included
Other included items are not known, so check the package contents against your installation before starting. Not included: the compressor and the leveling system components it plugs into.








