Overview
The Firestone Ride-Rite Air Command F3 Compressor, part number 2581, is a 12v wireless air compressor kit for adjusting Firestone Ride-Rite air bag helper springs. It lets you raise or lower the air springs from inside or outside the vehicle, which helps with leveling and hooking up a trailer.
The ECU and valve block share one housing that can be mounted in several locations. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- ECU and valve block combined into one easy-to-install unit
- Digital display with separate left and right wireless control
- Wireless remote for adjusting air springs from inside or outside the vehicle
- ECU and valve block tested against pressurized water, road chemicals, salt spray, immersion, shock and vibration
- One-piece housing protected from mud, dust, extreme temperatures and rust
Wiring and mounting location
The compressor and ECU sit in one housing, so placement matters for wiring length, heat and moisture. Pick a spot that stays dry, away from the exhaust and moving parts, and where the remote signal can reach. Fuse the 12v supply close to the battery, and route wire through grommets wherever it passes through metal.
Air springs work best when the system is set up for the load the vehicle carries. Test inflation and deflation on each side after installation, and check fittings for leaks with a soapy water test. Because the system is wireless, keep the remote batteries charged and carry a spare set for longer trips.
- Fuse the 12v supply near the battery
- Use grommets where wire passes metal
- Test each side for leaks after installation
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 2581 |
| UPC | 767555156544 |
| Compressor voltage | 12v |
| Control | Wireless remote with digital display |
| Housing | One-piece, environmentally protected |
Vehicle fitment
It is a direct fit for Firestone Ride-Rite Air Bag Helper Springs. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm that your air spring system is compatible before ordering, and confirm your vehicle’s year, model and trim.
Installation notes
The kit includes all hardware needed for installing it, along with an installation guide. Because the ECU and valve block can be mounted in more than one location, choose a dry, protected spot inside the vehicle and keep the 12v wiring clear of moving parts.
What’s included
The kit includes a 12v air compressor, a wireless remote control, an easy installation guide and all hardware needed for installing.
Not included: Air bag helper springs are not part of this kit.












