Overview
The Firestone Ride-Rite F3 mounting plate kit is a mounting plate for a leveling compressor system. The kit clamps to the vehicle with U-bolts and mounts the compressor, ECU and valve block.
Part numbers 2581, 2589, 2590, 2591 and 2592 are referenced, so confirm the kit matches your compressor system before ordering.
Key features
- Clamps to the vehicle with U-bolts
- Mounts the compressor, ECU and valve block
Mounting a leveling compressor
A mounting plate holds the compressor, ECU and valve block in a stable position, so the plate’s location matters as much as its clamps. Choose a spot on the frame or axle bracket that is clear of heat sources, moving parts and road spray, and leave room to reach the fittings and the wiring harness. Route air lines so they do not rub or pinch, and keep the electrical connections away from wet areas.
Check the U-bolt clamps after the first drives, since vibration can loosen them over time. Inspect the air lines, fittings and mounting hardware at regular service intervals, and look for chafing or cracking where lines pass the frame. Confirm the plate matches your compressor system before cutting or drilling anything.
- Choose a mounting spot clear of heat and moving parts
- Route air lines away from rubbing edges
- Recheck U-bolt clamps after the first drives
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model | F3 mounting plate kit |
| UPC | 767555160206 |
| Mounting | U-bolt clamps |
| Mounts | Compressor, ECU and valve block |
| Compatible with | Parts 2581, 2589, 2590, 2591 and 2592 |
Vehicle fitment
Fitment is decided by the Firestone part numbers 2581, 2589, 2590, 2591 and 2592 rather than by make, model or year. Match your leveling compressor system to one of those part numbers before ordering.
What’s included
Check the package contents against your installation before starting.









