Overview
The Edge 38406 is a pillar pod, a gauge mount made by Edge Products for CS2 and CTS2 gauges. It fits 2003 to 2008 Dodge Ram 2500 and Ram 3500 models and gives CS2 and CTS2 owners a factory-finish look.
The pod includes a CS2 and CTS2 adaptor mount and is made from .125″ ABS plastic with vacuum-formed edges. It can be adjusted so the gauge angles toward the driver once mounted. It is made for a close fit and finish. The part number is EDG38406.
Key features
- Adaptor mount for CS2 and CTS2 gauges included
- Durable .125″ ABS plastic construction
- Vacuum-formed edges
- Adjustable for easy viewing
- Manufactured for a precise fit and finish.
Mounting a pillar pod
A pillar pod places a gauge in the driver’s line of sight, which keeps readings visible without looking down at the center stack. The right mounting position balances visibility with clearance from the steering wheel, the airbag cover and the windshield. Dry-fit the pod before drilling or adhesive work.
Vehicles in this range often have a pillar trim that flexes with temperature changes, so mounting surfaces should be clean and dry before fastening. Check that the adaptor mount clears wiring behind the trim. Route any gauge wiring away from pedals and hinges, and secure it with clips so it does not rub on sharp edges. After installation, recheck fasteners after several drives, since trim can settle.
- Dry-fit before drilling
- Keep wiring clear of the airbag cover
- Recheck fasteners after the first drives
Specifications
| Brand | Edge |
|---|---|
| Part number | EDG38406 |
| Mount type | Pillar |
| Fitment | Direct fit |
| Material | ABS plastic |
| Thickness | .125″ |
| Included | CS2 and CTS2 adaptor mount |
Vehicle fitment
It fits the 2003 to 2008 Dodge Ram 2500 in the Laramie, SLT, ST, SXT, Sport and TRX4 trims, and the 2003 to 2008 Ram 3500 in the same trims.
Other Ram generations and other Dodge models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the adaptor mount against your CS2 or CTS2 gauge before mounting, and have the tools and fasteners your install needs ready before you begin. Disconnect the battery before working near the dash wiring.
What’s included
One pod with the CS2 and CTS2 adaptor mount.
Not included: The pod is made for owners who already have CS2 or CTS2 gauges.









