Overview
The EBC Brakes S3KR1028 is a rear Stage 3 Truck and SUV brake kit with dimpled and slotted rotors and pads for the 2005–2009 Land Rover LR3, 2010–2016 LR4 and 2011–2013 Range Rover Sport.
This rear kit fits the Land Rover LR3 and LR4 and the 2011–2013 Range Rover Sport. Its sport rotors are slotted to draw air under the pad and clear dirt, and they use blind drilled holes rather than through drilled ones.
About this part
The LR3 and LR4 are heavy vehicles, and the Range Rover Sport shares much of the same underpinnings, which is why one rear kit covers all three. The kit uses coated dimpled and slotted rotors with pads. Slots sweep debris from the pad surface, and dimples add cooling, which helps when towing or driving off road. Heavy SUVs like these do best with matched rotors and pads, since mixing a performance rotor with an old pad compound can cause noise or uneven wear. Both parts come in the kit, and the fitment covers several LR3, LR4 and Range Rover Sport trims.
Key features
- Rear Stage 3 Truck and SUV kit
- Dimpled and slotted coated rotors
- Rotors and pads in one kit
- Covers LR3, LR4 and Range Rover Sport
- Direct fit
- Brake lines not included
On the trail
Land Rover SUVs used off road or for towing put extra heat into the rear brakes, and the rotor surface and pads take the strain. Dimples help the rotor shed heat, while the slots sweep debris off the pad face so it grips cleanly on dusty trails. Blind drilled holes are a different design from through drilled holes, so the rotor keeps its strength but does not vent as directly.
Mud and sand can pack into slots, so rinse the wheels after rough trips and check for grit before it wears the pad. When the rear pads wear, check the rotor for a lip, scoring or hot spots, and replace them as a pair. Keep brake fluid fresh, since heavy use heats the system and can reduce pedal feel over time.
Specifications
| Brand | EBC Brakes |
|---|---|
| Part number | S3KR1028 |
| UPC | 847943033043 |
| Product type | Stage 3 Truck and SUV brake kit |
| Brake position | Rear |
| Rotor type | Dimpled and slotted |
| Rotors coated | Yes |
| Includes brake lines | No |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the EBC Brakes S3KR1028 includes the following vehicles and trims:
- 2005–2009 Land Rover LR3 (Base, HSE, HSE Lux, SE)
- 2010–2016 Land Rover LR4 (Base, HSE, HSE Lux, V8)
- 2011–2013 Land Rover Range Rover Sport (GT Limited Edition, GT Limited Edition 3, HSE, HSE Lux)
The list covers the LR3, LR4 and 2011–2013 Range Rover Sport only; other Land Rover models are not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Rotors and pads for the rear axle.
Not included: Brake lines.








