Overview
The EBC Brakes GD7462 is a front sport slotted brake rotor from the 3GD Series, sold as a set of two with a 13.8 in. diameter. Its wide slots are designed to vent hot gases and draw in cooler air, which helps limit brake fade. Confirm fit for your vehicle’s year, make and model before ordering.
Key features
- Wide slots vent hot gases and draw in cooler air
- Slots resist cracking, unlike many cross-drilled rotors
- Slots help keep the braking surface clear of dust and debris
- Coated rotor finish
- Front position with a Direct Fit label
Rotors and pad matching
Rotors and pads wear as a pair. Pads that are too hard or too soft for a slotted rotor can cause noise, uneven wear or poor bite, so choose a pad compound that suits the way you drive. Slotted rotors shed gas and debris from the pad face, which helps keep that face clear during hard use.
When replacing rotors, check that the hub face is clean and free of rust before mounting, and tighten the lug nuts in a star pattern. Inspect the slots for cracks after a few hot stops, and replace the rotor if it falls below its minimum thickness or cracks run across the friction surface.
- Clean the hub mating surface with a wire brush
- Torque lug nuts evenly to the vehicle’s specification
- Bed in new pads before heavy braking
Specifications
| Brand | EBC Brakes |
|---|---|
| Model | GD7462 |
| Series | 3GD Series Sport Slotted |
| UPC | 840655068518 |
| Position | Front |
| Quantity | Set of two |
| Diameter | 13.8 in. |
| Finish | Coated |
| Rotor type | Slotted |
Vehicle fitment
The GD7462 is a Direct Fit part for the front position. Match the 13.8 in. diameter and mounting to your vehicle’s front brake application.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two front sport slotted rotors. Brake pads are not included.









