Overview
The Dee Zee Trim To Fit Heavyweight Bed Mat, part number DZ86965, is a thick rubber truck bed mat that can be trimmed to fit a 6.5 ft. bed. Its main purpose is protecting the bed surface from scratches, dings and dents while keeping cargo from shifting and damaging the truck. The manufacturer fitment list names the 2005–2016 Nissan Frontier, so this mat is intended for Frontier owners.
The mat contours around the wheel wells for coverage across the bed floor. Shifting cargo can scrape the bed finish and leave loose items rolling around, so the rubber cleats on the reverse side help hold the mat in place and let water drain. The mat is made in the USA and carries a limited-lifetime warranty, which suits a bed that sees steady work.
Key features
- Can be trimmed to fit a 6.5 ft. bed; trimming may be required for short bed applications
- Extra thick .375 in. (9.52 mm) rubber compound construction
- Highly compressed rubber resists abrasions and tears
- Rubber cleats on the reverse side help keep the mat in place and allow water to drain
- Rubber resists common fuel and oil spills
- The rubber is designed to resist rust, cracking and breaking, including in cold and heat.
- Rubber material deflects UV rays to reduce fading
- Custom fit applications contour around the wheel wells
Cutting and fitting a trim-to-fit mat
Trim-to-fit mats are sold uncut so they can match the bed size of the truck. Before cutting, lay the mat in the empty bed and mark the edges where it meets the bed walls and wheel wells. Make small cuts, test the fit after each one, and remember that a cut cannot be undone.
A fitted mat should sit flat, follow the wheel well contours and leave the tie-down points accessible. Check that the rubber cleats sit against the bed floor so the mat does not slide when cargo is loaded. Clean the mat periodically and inspect the edges for curling or wear that could let cargo get underneath.
Heavier rubber mats are not meant to replace a bed liner, but they add a layer of protection for frequent loading. If you also use a tailgate mat, plan for it separately, since the main mat covers only the bed floor.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DZ86965 |
| Product type | Heavyweight trim to fit truck bed mat |
| Listed vehicle | Nissan Frontier, 2005–2016 |
| Material | Highly compressed rubber compound |
| Thickness | .375 in. (9.52 mm) |
| Bed length | Can be trimmed to fit a 6.5 ft. bed |
| Underside | Rubber cleats |
| Country of manufacture | Made in U.S.A. |
| Warranty | Limited-lifetime warranty |
Vehicle fitment
Covered are the 2005–2016 Nissan Frontier in the Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims. Other years and other Nissan models fall outside these trims, so confirm your year, model and trim before ordering.
Trims not named in the list and vehicles from other years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the bed before cutting, because the mat is sold as trim to fit and trimming may be required for short bed applications. Set the mat in the bed, check that the wheel well contours sit against the bed, and confirm the rubber cleats are seated before loading cargo.
What’s included
The trim to fit heavyweight bed mat, part number DZ86965.
Not included: The tailgate mat is sold separately.








