Overview
The Dee Zee Trim To Fit Heavyweight Bed Mat, part number DZ86645, is a rubber truck bed mat that fits 1975 to 1983 Ford F-100 pickups and 1975 to 1996 Ford F-150, F-250 and F-350 pickups. It can be trimmed to fit a 6.5 ft. bed, which suits owners who need to cut it down to length.
Built from extra thick 9.52mm rubber compound, it is meant to keep cargo from sliding and to shield the bed floor from scratches, dings and dents. Dee-Zee presents it as a way to stop loose items from rolling around the bed while the rubber stays grippy underneath.
Key features
- Trim To Fit design can be cut to a 6.5 ft. bed.
- Highly compressed rubber resists abrasions and tears.
- The rubber resists rust, cracks and breakage across extreme temperatures.
- Underside cleats hold the mat in place and let water drain off.
- Contours around the wheel wells for fuller bed coverage.
- Rubber deflects UV rays, and it resists common fuel and oil spills.
- Dee-Zee notes short-bed installs can call for trimming.
Choosing and fitting a bed mat
A bed mat works as a sacrificial layer between cargo and the steel floor. Loads that slide during braking or cornering can gouge paint and dent the floor, so a thick, grippy surface cuts down on that wear. On job sites and trails, the mat also keeps wet, muddy gear from sitting directly on bare metal, where rust tends to start around seams and fasteners.
When choosing a mat, think about how the truck gets loaded. Heavy tool boxes sit steadily on a firm surface, while gravel and lumber can wear the edges faster. If you plan to trim the mat, mark the cut line on the upper side, keep the cleats facing down, and confirm the trimmed edge still reaches the bed walls. Inspect the cleats after heavy loads, because torn cleats let the mat walk out of position over time.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DZ86645 |
| Product type | Trim To Fit heavyweight rubber bed mat |
| Bed length fit | Trimmable to a 6.5 ft. bed |
| Thickness | 9.52mm extra thick rubber compound |
| Material | Highly compressed rubber |
| Warranty | Limited-lifetime warranty |
| Origin | Made in U.S.A. |
Vehicle fitment
It fits 1975 to 1983 Ford F-100 and 1975 to 1996 Ford F-150, F-250 and F-350 pickups in the trims Base, Custom, Eddie Bauer, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat.
Later F-series years beyond 1983 for the F-100 and beyond 1996 for the F-150, F-250 and F-350 are outside this fit, as are Super Duty models. Check fit against your year, model and trim before buying.
Installation notes
Because the mat is meant to be cut down, measure the bed before cutting and trim only what the bed requires, since the mat is designed to trim down to a 6.5 ft. bed. Lay it flat before loading cargo so the cleats sit against the floor.
What’s included
The trim-to-fit heavyweight bed mat, DZ86645, in one piece.
Not included: Dee-Zee offers the tailgate mat separately, so a tailgate pad is not part of this item.









