Overview
Dee-Zee’s Bed Mat/Skid Mat, part number DZ87007, is a rubber truck bed mat sized for the 2015–2018 Ford F-150 in the Lariat, SSV, XL and XLT trims.
Once installed, the mat follows the bed floor up around the wheel wells, which closes the gaps where cargo would otherwise slide. It is meant to guard the floor against scratches, dings and dents. Rubber cleats on the reverse side keep the mat from moving out of position and let water drain away from the surface.
The mat is built heavy duty in the U.S.A., and it carries a limited-lifetime warranty. A mat that holds cargo in place also helps keep shifting loads from damaging the truck and reduces time spent chasing loose items around the bed.
Key features
- Thick .375 inch (9.52mm) body made from compressed rubber compound.
- Raised rubber cleats grip the bed and let water drain off the mat.
- The rubber resists abrasions and tears.
- The rubber will not rust, split or break in temperature extremes.
- Holds up against fuel and oil spills, and UV rays are deflected to limit fading.
- Shaped to follow the wheel wells for a custom fit; short beds may need trimming.
Keeping the bed floor clear
A bed floor takes steady punishment from tools, hitch parts and grit carried in on boots. A mat is the easiest place to absorb that wear, so keep it in good shape rather than letting debris grind into the bed beneath. Pull the mat periodically and sweep the floor below.
Water drainage matters as much as protection. Standing water can collect under a bed with no clear path out, so keep the cleat channels free of mud and small stones. After a wash or rain, lift a corner to see whether water has pooled underneath.
Choose cargo placement with the mat in mind. Heavy loads placed close to the cab stay steadier than items balanced near the tailgate. When you tie down, run straps over the load rather than against the mat edge, so the mat is not pulled out of its seat.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DZ87007 |
| Material | Rubber compound |
| Thickness | .375 inch (9.52mm) |
| Fit | Custom contoured around wheel wells |
| Short bed | Trimming may be required |
| Tailgate mat | Sold separately |
| Warranty | Limited-lifetime |
| Origin | Made in U.S.A. |
Vehicle fitment
Fitment for this part number covers the 2015–2018 Ford F-150 in Lariat, SSV, XL and XLT trims.
The King Ranch and Platinum trims are not covered by this part number, and other F-150 model years fall outside the range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Trimming may be needed for short beds, so check the fit before making any cuts. Set the mat in the bed with the wheel well contours seated first, then check that the reverse side with the cleats sits against the bed floor.
What’s included
A rubber bed mat, part number DZ87007.
Not included: The tailgate mat, which is sold separately.








