Overview
The Dee-Zee DZ86881 is a trim-to-fit heavyweight rubber truck bed mat that can be trimmed to fit a 6.5 ft. bed. It fits the 1999–2016 Ford F-250 Super Duty and F-350 Super Duty. The mat lies on the bed floor to shield the surface from scratches, dings and dents while keeping loose cargo from sliding around and striking the bed.
Dee-Zee shapes the mat to contour around the wheel wells, so coverage reaches the corners of the bed instead of leaving gaps. The thick rubber body is built for hard daily use, and the cleats on the underside let rain and wash water run off rather than collecting beneath the mat.
Key features
- Trim-to-fit design for a 6.5 ft. bed; short beds may need extra trimming
- Extra thick .375 inch (9.52mm) rubber compound
- Underside cleats hold the mat in place and allow water to drain
- Highly compressed rubber resists abrasions and tears
- The rubber will not rust, crack or break in extreme temperatures.
- Resists common fuel and oil spills and deflects UV rays to reduce fading
- Custom-fit contour around the wheel wells for a close fit
Care and inspection
Rubber bed mats last longer when they are cleaned regularly. Sand, mud and road grit can work into the cleats and the underside, so rinse the mat and let it dry before reinstalling it. Check the edges and cleats every few months for cracking, tearing or flattened ridges, since a worn cleat stops gripping the bed floor. A mat that slides or rattles usually means the cleats are clogged or the mat has shifted after a trim cut.
If you trim a mat to fit a shorter bed, keep the cut edge clean and inspect it after each haul. Loose cargo that rolls across a worn mat can still scratch the bed, so replace the mat once the cleats no longer hold it in place. Store spare mats flat rather than rolled tightly, which helps the rubber keep its shape.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DZ86881 |
| Type | Heavyweight truck bed mat, trim to fit |
| Material | Rubber compound, highly compressed |
| Thickness | .375 inch (9.52mm) |
| Bed length | Can be trimmed to fit a 6.5 ft. bed |
| Warranty | Limited-lifetime |
| Made in | U.S.A. |
Vehicle fitment
It fits 1999–2016 Ford F-250 Super Duty and 1999–2016 Ford F-350 Super Duty models, including the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims for both models. Match your truck’s year, model and trim to these entries before ordering.
Ford F-150 and other Ford models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Short bed applications may call for trimming, so compare the 6.5 ft. trim length with your bed before cutting anything. Set the mat down with the cleats facing the bed floor so the underside grips as intended.
What’s included
One heavyweight trim-to-fit rubber bed mat, part number DZ86881.
Not included: The tailgate mat, which is sold separately.








