Overview
The Daystar KJ02020BK is a set of black polyurethane shackle bushings that converts ordinary leaf spring shackles into greaseable shackles. It is for front or rear use and fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The greaseable design reduces binding, squeaking and corrosion compared with stock rubber bushings. The fluted bushings allow even lubrication, and the kit uses grade 5 bolts fitted with grease fittings. The polyurethane resists vehicle fluids and road grime.
Key features
- Converts stock shackles to greaseable shackles
- Eight bushings per kit
- Four grade 5 bolts with grease fittings
- Four locking nuts included
- Fluted bushings for even lubrication
- Reduces binding, squeaking and corrosion compared with stock rubber
- Front or rear use
Greasing and maintenance
A greaseable shackle relies on the grease fittings to keep the bushing and bolt working freely. Dry or dirty shackles bind, squeak and wear the bolt and bushing faster. Regular greasing keeps the joint moving, while the polyurethane itself resists the fluids and grime that otherwise build up.
When the kit is installed, the leaf spring should be fully supported so the shackle moves freely while greasing. Wipe each fitting before the grease gun is used to keep dirt out. Check the bolts and locking nuts after the first trail runs, and inspect bushings for cracks at each service.
- Grease after washing or water crossings
- Wipe fittings clean before greasing
- Check locking nuts after the first drives
- Inspect bushing edges for cracks
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ02020BK |
| UPC | 814423014458 |
| Color | Black |
| Material | Polyurethane |
| Position | Front or rear |
| Service | Greaseable |
| Bushings per kit | 8 |
| Bolts | 4 grade 5 with grease fittings |
| Locking nuts | 4 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
No other Wrangler generation or Jeep model appears in the list, so TJ, JK and later Wrangler owners should not assume this kit fits. Compare your Wrangler’s year and trim with the list above before deciding.
Installation notes
Grease the bushings through the fittings after installation, since the greaseable design depends on regular lubrication. Support the frame before removing the shackle bolts, because the leaf spring will drop once the shackle is loose.
What’s included
Each kit contains 8 bushings, 4 grade 5 bolts with grease fittings and 4 locking nuts. Check the kit against your installation, including any grease gun or tools you need.









