Select your vehicle

Daystar ComfortRide 2 Inch Leveling Lift Kit – KG09139BK

Daystar

Shop Daystar Suspension Leveling Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2-inch leveling kit for 2-wheel and 4-wheel drive models, sold as a pair
  • No-cut design, with no trimming of the factory studs
  • Rear lift method uses lift blocks and U-bolts, no shocks included
  • Part number KG09139BK, UPC 618089004965

Description

Overview

The Daystar ComfortRide KG09139BK is a 2-inch leveling kit sold as a pair. It is a no-cut design that leaves the factory studs untrimmed and works on 2-wheel and 4-wheel drive models.

The kit is made of high-density progressive polyurethane. It lifts the vehicle while keeping ride quality, improves ground clearance and allows larger tires. A lifetime go-everywhere guarantee comes with it.

Key features

  • 2-inch lift, sold as a pair
  • No-cut design
  • No trimming of the factory studs
  • Works on 2-wheel and 4-wheel drive models
  • Lifetime go-everywhere guarantee

Lift blocks and rear geometry

A rear lift built on lift blocks and U-bolts changes the axle’s position under the leaf springs, so the pinion angle and driveline length should be checked after installation. Lift blocks are a simple way to gain height at the rear, but they move the axle without changing the suspension’s travel, which is why the driveline and brake lines deserve a look once the work is done.

Because shocks are not included, the existing units are kept in place unless you choose new ones. Shocks with a longer mounting length may be needed to match the new height. Check the U-bolts for correct torque after the first few drives, since they settle as the lift blocks seat.

  • Check pinion angle after the lift is installed
  • Inspect U-bolts for correct torque after the first drive
  • Look at brake lines and the parking brake cable for stretch
  • Confirm shock length before reinstalling

Specifications

Brand Daystar
Part number KG09139BK
UPC 618089004965
Lift height 2 inches
Suspension type Spacer
Rear lift method Lift blocks and U-bolts
Shocks included No
Quantity Pair
Fitment type Direct fit

Vehicle fitment

Confirm fit for your model’s year, drivetrain and trim before ordering.

What’s included

Lift blocks and U-bolts are part of the rear lift method. Shocks are not included.

SKU: DAYKG09139BK Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 6.00 × 6.00 × 6.00 in
brands

Questions & Answers

Does the Daystar KG09139BK need shocks?

Shocks are not included. The kit is a spacer and lift-block design, with lift blocks and U-bolts used for the rear lift method.

Does this kit require trimming the factory studs?

No. It is a no-cut design, so the factory studs are not trimmed. It is a 2-inch lift sold as a pair.

Is the Daystar KG09139BK sold as one piece or a pair?

It is sold as a pair. The kit works on 2-wheel and 4-wheel drive models and comes with a lifetime go-everywhere guarantee.

Do lift blocks need any extra driveline work?

Often yes. Raising the axle can change the driveline angle, which may cause vibration. Measure the angle after installation and inspect the U-joints and driveshaft for wear before regular use.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Daystar Suspension Leveling Kits on Amazon