Overview
The Crown Automotive 55156514AC is a rear wiper arm nut cap, the cap that covers the nut on a rear wiper arm. Crown’s range includes many factory-discontinued items for Jeep vehicles.
Confirm the Jeep models and years that use this rear wiper arm nut cap before ordering.
Caring for the rear wiper arm
The nut cap sits over the arm’s retaining nut and keeps water, road grit and salt away from the threads. On a rear wiper, that protection matters because the arm sits in an exposed position at the liftgate and gets constant spray. When a cap cracks, slips or goes missing, the nut can corrode and the arm may become difficult to remove later.
Before installing a new cap, clean the nut and the arm base, then check that the nut is tight and that the arm sits square on the shaft. Look for cracked plastic, a loose fit or moisture trapped under the cap, since any of these can point to a leak or an older seal around the rear wiper. Matching the cap shape exactly to the arm keeps it seated and sealed. Avoid prying the cap with metal tools, which can scratch the arm finish.
- Cracked or brittle plastic
- Loose fit on the arm nut
- Corrosion under the cap
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55156514AC |
| UPC | 848399090802 |
| Position | Rear |
Vehicle fitment
Confirm fit for your Jeep’s year, model and trim before ordering, using the rear wiper arm position as your guide.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rear wiper arm nut cap, part 55156514AC. Check the package contents against your installation before starting.









