Overview
The Crown Automotive J3181291 is a left-position cork valve cover gasket for 304-401 V8 engines. It fits Cherokee (SJ), CJ5, CJ6, CJ7, Commando, J-series trucks and Wagoneer (SJ) models from 1972 to 1980.
Because the gasket is for the left position, confirm it matches the side of the engine you are working on before fitting.
Key features
- Cork material
- Left position
- Made for 304-401 V8 engines
- Covers J-series trucks along with CJ and Cherokee models
Cork gaskets and cover prep
Cork valve cover gaskets are a traditional choice on older engines, and they depend on a clean, flat sealing surface. Cork compresses under the cover bolts and can lose its grip if the surfaces hold old residue or the cover is warped. Cleaning the cover, the head rail and the bolt holes is usually the most important step.
Tighten cover bolts in an even pattern and avoid overtightening, since cork can crush or split. Some installers add a thin bead of sealant at the corners, but only use sealant suited to oil contact. After the first drive, check for seepage at the cover edges and retighten gently if needed. Look also at the PCV valve and breather, since blocked venting can push oil past the gasket.
- Check the cover for warping before fitting
- Replace worn cover bolts or grommets at the same time
- Recheck bolts after the engine has heated and cooled
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3181291 |
| UPC | 848399058451 |
| Engine | 304-401 V8 |
| Material | Cork |
| Position | Left |
Vehicle fitment
It fits Cherokee (SJ) from 1974 to 1980, CJ5 from 1972 to 1980, CJ6 from 1972 to 1975, CJ7 from 1976 to 1980, Commando from 1972 to 1973, the J-100, J-2500, J-2600, J-4500, J-4600, J-4700 and J-4800 trucks from 1972 to 1973, J10 and J20 from 1974 to 1980, and Wagoneer (SJ) from 1972 to 1980.
Model years from 1981 onward and CJ models before 1972 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the gasket is cork, clean the sealing surfaces on the cover and cylinder head before fitting, and confirm the left position matches your engine.
What’s included
This is a left-position gasket. Compare the package contents with your installation steps first.












