Overview
The Crown Automotive 56005099 is a clear turn signal lamp for the driver side front left position on the 1993–1997 Jeep Grand Cherokee (ZJ). It has three connectors, so check the plug before fitting.
It covers Base, Laredo, Limited, Orvis, SE and TSi trims of this generation.
Key features
- Driver side, front left position
- Clear lens
- Three connectors
- Turn signal function
- Direct fit for the covered trims
Turn signal lamp upkeep
Turn signal lamps on the front corners are exposed to road salt, spray and heat cycling from the headlight area. The lens can fog, and the seal can let moisture reach the socket. Over time that moisture shows up as a flicker, a slow flash, or a lamp that will not light. Checking the seal and socket during routine service helps catch these problems early.
When fitting a new lamp, clean the socket and harness plug before reconnecting. A small amount of dielectric grease on the contacts helps keep water out. After installation, operate the turn signal in both directions and confirm the flash rate on the dash, since a poor connection often shows up only under load.
- Inspect the seal for cracks or softness
- Clean the socket before reconnecting
- Test both turn directions after fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56005099 |
| UPC | 848399021950 |
| Position | Front left (driver side) |
| Color | Clear |
| Type | Lens |
| Connectors | 3 |
| Fit type | Direct fit |
Vehicle fitment
It covers 1993–1997 Jeep Grand Cherokee (ZJ) Base, Laredo, Limited, Orvis, SE and TSi trims.
The XJ Cherokee and WJ Grand Cherokee are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Three connectors are part of the design, so verify the plug type on your harness before installation.
What’s included
One driver side clear turn signal lamp is described.
















