Overview
The Crown Automotive J0991020 is a T14 blocking ring with 21 teeth for the T14 transmission. Blocking rings, also called synchronizer rings, help the gears match speed when shifting.
It fits 1967 to 1972 Jeep CJ5 and CJ6 models, a range of J-series trucks from J-2500 to J-4800, and the Wagoneer (SJ), all in Base trim.
Key features
- 21 teeth
- T14 transmission application
- Part number J0991020 with UPC 848399056846
- Fitment list covers 1967–1972 CJ and J-series models
Synchronizer basics for older Jeeps
Blocking rings in older Jeep transmissions help gears match speed before they lock, and they take the most wear in a worn gearbox. Wear shows as grinding, hard shifts, or a gear that pops out under load. A ring with a tooth count that does not match the gear it replaces will not work correctly.
On trucks and CJ models driven for many years, the hubs and gear cones often show the same wear as the rings. Before reassembly, check the ring faces, the cone surfaces and the splines. Old transmission fluid can carry debris that wears new rings, so a fresh fill is a good habit.
- Check tooth count against the gear
- Inspect cone surfaces on the gears
- Use clean transmission fluid after the job
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0991020 |
| UPC | 848399056846 |
| Teeth | 21 |
| Transmission | T14 |
| Component | Blocking ring |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes 1967–1972 Jeep CJ5 (Base) and CJ6 (Base), the J-2500, J-2600, J-3500, J-3600, J-3700, J-3800, J-4500, J-4600, J-4700 and J-4800 trucks, and the Wagoneer (SJ) (Base).
CJ7, Cherokee and Wrangler models are not in this list, and CJ5 or J-series years after 1972 are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The T14 blocking ring with 21 teeth, part number J0991020. Other transmission parts are not included.














