Overview
The Crown Automotive 83503579 is a rear left body corner panel for the driver side of the 1987–1995 Jeep Wrangler (YJ). It is a direct-fit replacement for the rear corner of the body.
It is one of Crown Automotive’s direct-fit replacement body parts for the YJ. It needs additional preparation before paint is applied.
Key features
- Driver side, rear left position
- Direct-fit rear body corner panel
- Requires additional preparation before painting.
- Part number 83503579 with UPC 848399081947
Prep and paint steps
A rear corner panel usually arrives unpainted, so the steps before paint matter for how long the repair lasts. Clean off any oil, wax or shipping residue with a degreaser. Scuff the surface, then apply an etch primer or epoxy primer suited to bare steel. Check the fit before painting, because a panel that needs trimming or bending is much harder to correct once it is coated.
Driver side corner repairs are often done with the door, quarter and tailgate hinge areas in view, so match the gaps while the panel is only tacked in place. Replace the seal around the opening if it is brittle. Seal the seams with a flexible sealer and coat the inside of the panel before final installation.
- Degrease to remove residue
- Scuff and prime bare steel
- Match gaps before final fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83503579 |
| UPC | 848399081947 |
| Position | Rear left (driver side) |
| Fit type | Direct fit |
| Type | Rear body corner panel |
Vehicle fitment
It fits 1987-1995 Jeep Wrangler YJ models in trims including Base, Islander, Renegade and Sport.
Other Wrangler generations, the Cherokee and the Grand Cherokee are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It needs additional preparation before paint is applied, so plan for prep work before painting.
What’s included
One rear left (driver side) body corner panel, part number 83503579.









