Overview
The Crown Automotive 56007255 is a multifunction turn signal switch made as an in-steering-column switch with harness and connector. It is made for the 1994 Jeep Cherokee (XJ) and the 1994–1995 Jeep Wrangler (YJ).
Because the switch comes with its harness and connector, it arrives as a complete unit for the column. Compare the mounting and connector against your vehicle before installing.
Key features
- Steering column switch design
- Harness and connector included
- Multifunction turn signal control
- Made for 1994 XJ and 1994–1995 YJ models
Column switch replacement
A steering column turn signal switch sits behind the wheel and carries signal and multifunction controls into the column. Its contacts are used every time a turn is made, so the parts most often needing replacement are the contacts, the lever pivot and the connector at the column. A switch that works only when pressed in a certain position usually has worn contacts.
Because this unit arrives with its harness and connector, it is a more complete replacement than a bare switch. Still, compare the plug and mounting points with the existing column before removing the old unit, and keep the old harness until the new one is confirmed working. Older wiring often has brittle insulation that should be addressed at the same time.
Work with the battery disconnected before touching the column. Support the steering wheel and column covers while the switch is removed, and take care not to damage the clockspring or airbag components. After fitting, check all signal positions, the cancel action and the return to center before reassembling the covers.
- Disconnect the battery before starting
- Compare mounting and connector first
- Check every signal position after fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56007255 |
| UPC | 848399022193 |
| Type | Multifunction steering column turn signal switch |
| Included | Harness and connector |
Vehicle fitment
It fits the 1994 Jeep Cherokee (XJ) in Country, SE and Sport trims, and the 1994–1995 Jeep Wrangler (YJ) in Renegade, Rio Grande, S, SE and Sahara trims.
The XJ fit covers 1994 only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect the battery before working on the steering column. Compare the harness and connector with your existing column connector before installing.
What’s included
One steering column switch with harness and connector.
