Overview
The Crown Automotive multifunction turn signal switch, part number 56002011, is a steering column switch for vehicles with a tilt steering column. It includes a steering column turn signal cancel cam, which cancels the signal after a turn.
Crown Automotive makes and distributes replacement parts for Jeep vehicles. This switch is designed as a direct fit.
Key features
- Multifunction turn signal switch
- Designed for vehicles with a tilt steering column
- Lists a steering column turn signal cancel cam
- It is designed as a direct fit.
Steering column switch basics
The turn signal switch sits on the steering column and controls the signal, the high beam and often the wiper or washer functions in a multifunction design. Because several circuits run through one housing, a failing switch can cause flicker, signals that do not cancel or lights that stop working. A tilt column adds movement to the assembly, so the wiring near the column needs room to flex. Check for worn wiring insulation before blaming the switch itself.
When replacing a switch, check the wiring connector, the cancel cam and the mounting screws before installing the new unit. Keep the steering wheel centered during reassembly so the clock spring stays aligned. Avoid forcing connectors, and test every function with the ignition on before reassembling the column covers. Keeping notes on which wire goes where can save time later.
- Check the connector for bent pins
- Confirm the cancel cam engages after a turn
- Test wipers, washers and high beam
- Reinstall column covers only after testing
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56002011 |
| UPC | 848399021639 |
| Steering column type | Tilt |
| Switch type | Multifunction turn signal |
| Cancel feature | Steering column turn signal cancel cam |
Vehicle fitment
It is designed for vehicles with a tilt steering column, as a direct fit.
Make sure your year, model and trim match before ordering. Check your steering column type before installing, since the switch is designed for tilt columns only.
What’s included
The package contains the switch. Inspect the contents against your installation before starting.









