Overview
The Crown Automotive 56009869AB is a headlamp switch for the 1997–2001 Jeep Cherokee (XJ) and the 1997–2001 Jeep Wrangler (TJ). It controls the headlights, so match it to the trim list below before you fit it.
It is a direct fit for the 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, and the 1997–2001 Jeep Wrangler (TJ) in SE, Sahara and Sport trims.
Key features
- Headlamp switch with part number suffix AB
- Direct fit for the XJ and TJ trims below.
- Fits the XJ Cherokee and TJ Wrangler.
- Covers the XJ and TJ trims in the vehicle fitment section.
Headlamp switch troubleshooting
When a headlamp switch fails, lights may drop out at random, work only in certain positions, or stay on after the switch is turned off. Begin with the fuse and the bulbs, then test the switch and its connector. A switch that is intermittent often improves briefly after being pushed or tapped, which points to worn contacts.
Because the switch controls headlights, check the surrounding wiring for chafing where it passes through the dash or firewall area. Replacing a switch without fixing a damaged harness can lead to a repeat failure. Keep wiring routed away from sharp edges and secure it with the original clips.
- Check fuse and bulbs first
- Look for chafed wires near the dash
- Secure wiring away from sharp edges
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56009869AB |
| UPC | 848399045826 |
| Type | Headlamp switch |
| Fitment type | Direct fit |
| Years | 1997–2001 |
Vehicle fitment
It fits the 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, and the 1997–2001 Jeep Wrangler (TJ) in SE, Sahara and Sport trims.
The list does not include other Jeep models or years outside the ones named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The switch sits in the headlight circuit, so disconnect the battery before removing the old one and label the connectors before unplugging them.
What’s included
Check the connector and hardware against your installation before starting.
















