Overview
The Crown Automotive J3205596 is a black plastic headlight switch connector for older Jeep models: the Cherokee (SJ), CJ5, CJ6 and CJ7, J-series trucks and the Scrambler. It covers model years from 1973 to 1986, so check your model and year before choosing it.
It is a replacement part that reuses the hardware already on the vehicle.
Key features
- Black plastic connector construction
- Reuse the existing hardware when fitting it.
- Replacement part for classic Jeep and Scrambler models
- Covers many trims across the classic Jeep models.
Working on older Jeep wiring
Headlight switch connectors on older Jeeps are exposed to heat, dirt and moisture under the dash, and the plastic housing can become brittle with age. A cracked or melted connector can cause intermittent headlights, a dim beam, or a switch that cuts out when the dash is moved. Inspecting the connector and the wires leading into it is often as important as the switch itself.
Before pulling the old connector, label or photograph the wire positions so the new one goes back exactly as it was. Older wiring may be brittle, so use gentle pressure on the locking tabs and avoid tugging on the wires. Look for green corrosion on the terminals and clean them with contact cleaner if needed. Replacing a connector along with a worn switch is common when the wiring has been heated.
- Check the fuse for the headlight circuit
- Inspect the wire insulation near the connector
- Replace brittle or cracked terminals rather than forcing them
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3205596 |
| UPC | 849603018667 |
| Color | Black |
| Material | Plastic |
| Mounting | Re-use existing hardware |
| Type | Headlight switch connector |
Vehicle fitment
The vehicles covered are the 1974–1983 Jeep Cherokee (SJ), 1973–1983 Jeep CJ5, 1973–1975 Jeep CJ6, 1976–1986 Jeep CJ7, 1973 J-2500, J-2600, J-4500, J-4600, J-4700 and J-4800 trucks, 1974–1985 Jeep J10 and J20, and 1981–1985 Jeep Scrambler, each in the trims named for it.
Models outside those years, and the later Wrangler and Cherokee generations, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the original fasteners when removing the old connector, and reuse them on the new one. Disconnect the battery before working on the headlight wiring.
What’s included
Check the package contents against your installation before starting.









