Overview
The Crown Automotive 52017534 is a passenger side front engine mount for 2.5L 4 cylinder engines in the 1991 to 1995 Jeep Wrangler (YJ). It has a black rubber bushing and is listed in the Direct Fit style.
Crown Automotive describes itself as a manufacturer and distributor of replacement parts for Jeep vehicles. An engine mount supports the engine on the frame and absorbs engine vibration, so a worn mount can show up as excess engine movement.
The engine mount supports the engine on the frame and absorbs vibration. This one installs at the front on the passenger side, the right position, and it fits the 2.5L 4 cylinder engine. Check the package contents against your installation before starting. When one mount has failed, inspect the remaining engine and transmission mounts while access is open, and compare the new mount with the old one before installing it.
Key features
- Front engine mount, passenger side (right position)
- For 2.5L 4 cylinder engines
- Rubber bushing, black
- Direct Fit style
- Jeep replacement part from Crown Automotive
Recognizing a worn mount
An engine mount has a rubber bushing that absorbs vibration and holds the engine steady on the frame. As the rubber ages, it can crack, split or soften, and the engine begins to move more than it should under throttle changes or when shifting gears.
Excess movement often shows up as a clunk on acceleration or deceleration, or as vibration felt through the steering wheel and seats. Inspect the mount while the engine is supported, looking at the bushing for gaps and checking that the engine returns to its normal position after a load is applied.
- Look for cracks or splits in the black rubber
- Listen for clunks during shifts or hard acceleration
- Check for abnormal engine movement under load
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52017534 (also sold as CRO52017534) |
| UPC | 848399014174 |
| Part type | Front engine mount |
| Position | Right (passenger side) |
| Engine | 2.5L 4 cylinder |
| Bushing material | Rubber |
| Bushing color | Black |
| Fit type | Direct Fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive 52017534 engine mount is:
- 1991 to 1995 Jeep Wrangler (YJ) (Base, Islander, Rio Grande, S, SE, Sahara)
It fits the Wrangler YJ with the 2.5L 4 cylinder engine only. Other engines, the TJ and other Jeep models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Support the engine properly before loosening a mount, and never work under a vehicle held only by a jack. Tighten mounting bolts to the correct torque for this mount. Engine mount work can affect driveline alignment, so professional installation is a sensible choice. Re-check fasteners after the first miles.









