Overview
The Crown Automotive J3218976 is an engine valve stem seal, a small seal that fits over the valve stem to limit oil passing into the combustion chamber. It carries part number J3218976 and UPC 848399059687.
It is marked Universal Fit. Seal size depends on the engine, so match the seal to your engine before installing.
Key features
- Engine valve stem seal
- Marked Universal Fit
- Crown Automotive part number J3218976
- UPC 848399059687
Signs of worn stem seals
A valve stem seal sits on the guide and wipes oil from the valve stem as it moves. When the seal hardens or cracks, oil can run down the stem into the combustion chamber, especially after the engine has been idle. The usual symptoms are blue smoke on startup and a gradual rise in oil use.
Stem seals are inexpensive, but they are usually changed while the head is serviced, since the valves need to be held in place. Replace the seals whenever the head is off, and check the guides and valve springs at the same time so the new seals are not undermined by other wear.
- Blue smoke on startup or after idling
- Gradual drop in oil level between changes
- Replace seals together with guides when the head is off
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3218976 |
| UPC | 848399059687 |
| Part type | Engine valve stem seal |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment shown. Check your engine’s valve stems against the seal before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Valve stem seals are normally replaced with the cylinder head off or with a spring compressor fitted, so this is typically work for an experienced mechanic.
What’s included
The part is an engine valve stem seal. Check the package contents against your installation before starting.












