Overview
The Crown Automotive 52060204AF is an e-brake cable for 4-door models of the 2007–2018 Jeep Wrangler (JK), meaning the Unlimited, and it can go on either the driver side or the passenger side. The e-brake cable is the parking brake cable that applies the rear brakes.
The cable fits the 4-door Wrangler JK Unlimited, including Rubicon, Sahara, Sport and X trims, and one part number serves both sides.
Key features
- E-brake cable for 4-door Wrangler JK models
- Usable on the driver or passenger side
- Direct fit for 2007–2018 Wrangler (JK) Unlimited
- Replacement part from Crown Automotive
Checking the parking brake
The parking brake cable runs from the lever or pedal to the rear brakes, so it carries the load whenever the vehicle is parked. Over time the sheath can crack, the housing can rust, and the inner cable can stick, which leaves the rear brakes partly engaged or not holding at all. A new cable should move smoothly through its full travel without binding at any bend.
When a cable is replaced on a Wrangler, the rear brake hardware is often already exposed. Check the shoes or pads, drums or rotors, and the wheel cylinder or caliper for wear, damage, or leaks. Adjust the cable so the lever or pedal engages at the right point, then test that the vehicle holds on a slope before returning it to service.
- Route the cable clear of exhaust heat and moving parts
- Lubricate the lever pivot and clevis where the cable attaches
- Test the lever travel after the adjustment
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060204AF |
| UPC | 848399038743 |
| Part type | E-brake cable |
| Body style | 4-door models |
| Position | Driver or passenger side |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) Unlimited, the 4-door body style.
It does not fit the 2-door Wrangler JK, the TJ or the JL. Check fit against your vehicle’s year, model and trim before buying.









