Overview
The Crown Automotive J3201027 is a drum brake self-adjusting cable for the rear brakes of the 1984–1989 Jeep Cherokee (XJ), 1978–1983 CJ5, 1978–1986 CJ7, 1987–1992 Comanche, 1981–1985 Scrambler and 1987–1989 Wrangler (YJ).
It fits the driver or passenger side, so one cable number covers both rear wheels.
Key features
- Rear drum brake self-adjusting cable
- Fits driver or passenger side
- Direct-fit replacement design
- Listed across CJ, Scrambler, Cherokee, Comanche and YJ models
Self-adjusters and cable wear
A self-adjusting cable keeps the drum brake shoes close to the drum as the linings wear, so the pedal stays firm without frequent manual adjustment. When the cable seizes or stretches, the shoes can drag, the brakes may pull to one side, or the pedal can feel low. Check the cable housing for kinks, rust and sticking movement when the drum is off. Manual adjustment is still needed after a shoe replacement.
Lubricate the cable pivot points and the anchor area lightly with a suitable grease, and make sure the cable routes freely without rubbing. Replace the cable if it binds, shows fraying, or the self-adjuster stops working, and check the springs and the star wheel at the same time. After installation, do a few gentle stops and then check that the shoes release fully.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3201027 |
| UPC | 848399059007 |
| Part type | Drum brake self-adjusting cable |
| Position | Rear |
| Side | Driver or passenger |
| Fit type | Direct fit |
Vehicle fitment
It fits the Jeep Cherokee (XJ) 1984–1989, CJ5 1978–1983, CJ7 1978–1986, Comanche 1987–1992, Scrambler 1981–1985 and Wrangler (YJ) 1987–1989.
Later XJ, TJ and Wrangler years are not covered, and the cable is for rear brakes only. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
- One rear drum brake self-adjusting cable









