Overview
The Crown Automotive 68142831AA is a cylinder head bolt for the 2.8L diesel engine. Ten are required, and the bolts should not be re-used because they are torque-to-yield fasteners.
Key features
- Cylinder head bolt for the 2.8L diesel engine
- Torque-to-yield fastener
- Ten required for the job
- Should not be re-used
Torque-to-yield bolts
Torque-to-yield bolts are tightened past their elastic limit so they stretch to a set clamp load. That stretch is why they are installed once and replaced after removal. Reusing a stretched bolt can lead to uneven clamping, head gasket leaks, or a bolt that fails under heat cycling.
Before installing new bolts, clean the threads and bolt holes, and make sure the head and block surfaces are free of old gasket material. Tighten in the sequence given in your repair procedure, working in stages rather than all at once. Keep coolant and oil passages clear of debris as the head comes off.
- Clean threads and bolt holes before assembly
- Install the full set of new bolts together
- Tighten in the specified sequence and stages
- Check the head surface for warping before reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68142831AA |
| Fastener type | Cylinder head bolt, torque-to-yield |
| Engine | 2.8L diesel (w/2.8L Diesel Engine) |
| Quantity required | 10 |
Vehicle fitment
No vehicle years, makes or models are given. The only application stated is the 2.8L diesel engine, so check your engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are torque-to-yield bolts that should not be re-used, so plan on a full set of new bolts. Ten are required.
What’s included
Check the package contents against your installation before starting; ten bolts are required for the job.









