Overview
The Fabtech FTS26080 is box 1 of 2 in a Component Box set for a 6 in. lift, made for kit numbers K7059M, K7060DL and K7061DL. It is a suspension component that works with box 2 of 2 and the rest of the kit.
The kit is built from high-quality materials. This box is identified by its 6 in. lift height and kit numbers rather than by a vehicle model.
Key features
- Box 1 of 2 in a 6 in. lift set
- Covers kit numbers K7059M, K7060DL and K7061DL
- Other kit parts are necessary to complete the set, Fabtech notes
- Suspension lift kit component
Matching lift components
A lift component set works as a system, so each box has to be paired with its partner and the rest of the kit. Before you start, lay out every part and compare the labels, kit numbers and box numbers against your packing list. Mixing components from different kits can cause height and alignment problems that are hard to correct later.
Suspension lifts also change angles in the drivetrain and steering, so plan for a full inspection of brake lines, driveshaft clearance and steering linkage once the install is finished. Torque all fasteners to the level in your service information and re-check them after the first few drives, since new parts often settle.
- Confirm the kit number matches before cutting or drilling
- Keep hardware sorted by box and step
- Re-check fasteners after the first trail or road run
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26080 |
| UPC | 674866106062 |
| Lift height | 6 in. |
| Kit numbers | K7059M, K7060DL, K7061DL |
| Box | Box 1 of 2 |
Vehicle fitment
This box is not tied to a named vehicle. Match the 6 in. lift and kit numbers K7059M, K7060DL and K7061DL to your kit before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Component Box, box 1 of 2.
Not included: box 2 of 2 and the other kit parts that are needed for a full setup.









