Overview
The Fabtech FTS22279 is the rear Component Box for an 8 in. lift, matched to kit numbers K2265DL, K2297DL and K2301DL. It covers the rear portion of that lift set.
Match the 8 in. lift height and the kit numbers to your setup before ordering.
Key features
- Rear box position within the 8 in. lift set
- Covers kit numbers K2265DL, K2297DL and K2301DL
- Other components are required for a full setup.
- Suspension lift kit component from Fabtech
Rear box installation notes
A rear box matters most when it is installed with the front box and the remaining kit parts, so treat the set as one job. Confirm K2265DL, K2297DL or K2301DL against your lift, and lay out the rear components before opening the front box. Rear pieces often share brackets and fasteners with other parts, which makes a complete inventory worthwhile.
Check suspension clearance and brake line length once the rear is in place, and watch for rubbing at full travel. Retorque fasteners after the first few drives and inspect bushings and bump stops at routine service. Replace worn parts while the vehicle is already raised so the new setup starts on solid ground. Keep the rear hardware separated from the front to avoid mix-ups.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22279 |
| UPC | 674866105867 |
| Lift height | 8 in. |
| Kit numbers | K2265DL, K2297DL, K2301DL |
| Position | Rear |
Vehicle fitment
Fit follows the 8 in. lift height and kit numbers rather than one vehicle. Compare those with your kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Rear Box Kit, Component Box for the 8 in. lift.
Not included: the front box and remaining kit parts, which are needed for a full setup.









