Overview
The Fabtech FTS22272 is a Component Box for an 8 in. lift, matched to kit numbers K2265DL, K2297DL and K2301DL. It belongs to Fabtech’s suspension lift kit component range and works as one part of a larger set.
The 8 in. lift and the three kit numbers are the main points to check against your setup.
Key features
- Designed for 8 in. lift applications
- Matched to kit numbers K2265DL, K2297DL and K2301DL
- The rest of the kit must be added for a full setup.
- Listed under Fabtech suspension lift kit components
Planning an 8 in. build
An 8 in. lift is a larger change than most setups, so planning starts with the kit numbers and the rest of the suspension. Compare K2265DL, K2297DL and K2301DL with the number on your lift, then confirm every other part the set needs before ordering. Larger lifts often change steering geometry, driveline angles and brake hose length, so plan for those adjustments early.
After installation, check steering travel, shock extension and clearance through full articulation. Retorque every fastener after the first few drives and inspect the bump stops and bushings at each service interval. Replacing worn parts during the same job avoids having to remove the lift again later. Keep a record of the installed kit numbers for future reference.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22272 |
| UPC | 674866105874 |
| Lift height | 8 in. |
| Kit numbers | K2265DL, K2297DL, K2301DL |
Vehicle fitment
Fit follows the 8 in. lift and kit numbers K2265DL, K2297DL and K2301DL rather than one vehicle. Match those against your kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Component Box for the 8 in. lift.
Not included: the complete lift kit and the other parts Fabtech says are required for a full set.









